What type of container do you use during fermentation for a 15 gallon batch?

Winemaking Talk - Winemaking Forum

Help Support Winemaking Talk - Winemaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CipolloneWine

Junior Member
Joined
Oct 14, 2017
Messages
12
Reaction score
4
Hi everyone! Newbie here looking forward to my 3rd season of making wine from grapes. All of my equipment is from my grandpa that’s been sitting in the basement. It’s all at least 50 years old. I have a crusher and a few 15 gallon glass demi-Johns. What do you use for your fermentation vessel if you have 15 gallons or more? I’d like to get something better than the glass demi-Johns. I’m always afraid of it breaking.
 
If I were doing a 15 gallon (net) batch, I would ferment using a 32 gallon brute, that I would then put into three carboys, that are 5 gallons each.

The 32 gallon brute trash can is food safe and would give you plenty of head room. The 5 gallon glass carboy is a very oxygen safe container for wine and makes for around a 50 pound container when full, which is somewhat manageable.
 
Last edited by a moderator:
An alternative is to buy a 55gal polyethylene drum that come with a sealing lid. These have FDA compliant resins and are the industry standard for transporting food products. There are a lot of posts about using Brute trash cans in this forum (not picking on anyone here) and no one to my knowledge has become ill yet, but it is still a "trash can" and you can decide if you want to be drinking your wine made in it later. The designation of calling something "food safe" always comes with limits on time duration, acidity, and temperature before it becomes unsafe for food.
 
Brute fermentation vessels :h are made out of HPDE, the highest grade plastic of choice for food prep. I don’t use my 20, 32 or 44 gallon Brute for regular trash service.
 
I’ve got some inherited Demi’s as well. If you talking about not wanting to ferment in the Demi’s 100% definitely don’t wanna do that.
Going by 36lb lug increments, x6 lugs isn’t enough to fill the demi and need minimum 7 lugs.
I’ve been doing 8 lugs to be safe and get a demijohn filled plus a carboy if finished wine. Primary in a 44 gallon brute or x2 20’gals (also allows to use different yeasts and have some fun) for fermentation. I bought Carlisle brand on Amazon. Like half the price. And American made. And food safe. https://www.amazon.com/dp/B002O8LDV6/?tag=skimlinks_replacement-20
 
Last edited by a moderator:
Brute fermentation vessels :h are made out of HPDE, the highest grade plastic of choice for food prep.

Uline lists the Brutes as LLDPE plastic that meets the NSF 2 food contact standards. I visited the NSF website but could not find what that standard specifically means in terms of temperature and material contact. (You have to purchase the standards?!) However this chemical compatibility chart for LLPDE shows that it is considered satisfactory for all the main chemicals in wine at the temperatures in which wine is manufactured.

Bottom line is that the Brute trash cans appear to be a safe option if you don't have stainless.
 
Thank you everyone for your suggestions! I considered using trash cans, but I was worried about how the air would contact all the wine. How do you seal it? Do you fill it all the way to the top?
 
I’ve got some inherited Demi’s as well. If you talking about not wanting to ferment in the Demi’s 100% definitely don’t wanna do that.
Going by 36lb lug increments, x6 lugs isn’t enough to fill the demi and need minimum 7 lugs.
I’ve been doing 8 lugs to be safe and get a demijohn filled plus a carboy if finished wine. Primary in a 44 gallon brute or x2 20’gals (also allows to use different yeasts and have some fun) for fermentation. I bought Carlisle brand on Amazon. Like half the price. And American made. And food safe. https://www.amazon.com/dp/B002O8LDV6/?tag=skimlinks_replacement-20

Yes, you are right. I only did 5 lugs last year and it wasn't enough. I plan to increase my volume this year. Of course, I need more to drink. :)
 
Last edited by a moderator:
Thank you everyone for your suggestions! I considered using trash cans, but I was worried about how the air would contact all the wine. How do you seal it? Do you fill it all the way to the top?

No worries about headspace or sealing. That’s just how kits suggest fermenting. But for grape batches it’s needed to have full access and punching the thick cap. Cap is also protecting the wine underneath. Essentially my lid is just for fruit flies.
This pic is (x2) 20 gal cans. 4 lugs in each. One punched and other full cap. U can easily see the difference. At the peak they went even higher. Any closer to the top and it can get quite messy when stirring. If looking to fill a demi of finished wine I suggest minimum 7lugs. Will end up with A couple gallons extra. But will use it to top up after racks. IMG_2123.jpg
 
I currently use 60 liter or larger Speidel HDPE barrels. Such as:

https://morewinemaking.com/products/speidel-plastic-fermenter-60l-159-gal.html

Easy to clean. And can be used for long term bulk storage and aging as well due to low O2 permeability, so are multi-purpose vessels which justifies the added cost. Am also looking into maybe getting some polypropylene variable tanks (much, much cheaper than SS for the size I am looking at).

Unlike things like Brute containers, the tanks I use or may use (either HDPE or PP) are specifically manufactured for wine making. That matters to me. :)
 
I currently use 60 liter or larger Speidel HDPE barrels. Such as:

https://morewinemaking.com/products/speidel-plastic-fermenter-60l-159-gal.html

Easy to clean. And can be used for long term bulk storage and aging as well due to low O2 permeability, so are multi-purpose vessels which justifies the added cost. Am also looking into maybe getting some polypropylene variable tanks (much, much cheaper than SS for the size I am looking at).

Unlike things like Brute containers, the tanks I use or may use (either HDPE or PP) are specifically manufactured for wine making. That matters to me. :)

I have one of those i bought used but it was originally used for making beer. i'm paranoid to use it for wine because I cant convince myself i've cleaned it enough
 
No worries about headspace or sealing. That’s just how kits suggest fermenting. But for grape batches it’s needed to have full access and punching the thick cap. Cap is also protecting the wine underneath. Essentially my lid is just for fruit flies.
This pic is (x2) 20 gal cans. 4 lugs in each. One punched and other full cap. U can easily see the difference. At the peak they went even higher. Any closer to the top and it can get quite messy when stirring. If looking to fill a demi of finished wine I suggest minimum 7lugs. Will end up with A couple gallons extra. But will use it to top up after racks.

These are perfect! Then what do you press into? Multiple carboys?
 
I currently use 60 liter or larger Speidel HDPE barrels. Such as:

https://morewinemaking.com/products/speidel-plastic-fermenter-60l-159-gal.html

Easy to clean. And can be used for long term bulk storage and aging as well due to low O2 permeability, so are multi-purpose vessels which justifies the added cost. Am also looking into maybe getting some polypropylene variable tanks (much, much cheaper than SS for the size I am looking at).

These are out of my price range for how. Since I'm still a newbie, I don't want to spend too much from the start. But I will definitely add this to my wish list. Thanks!!
 
I have one of those i bought used but it was originally used for making beer. i'm paranoid to use it for wine because I cant convince myself i've cleaned it enough

I bought two 32 gallon Spiedels from a beermaker $50 each on Craigslist. PBW and cleaned really well, have been using them for the past 3 seasons without issue.
 
Back
Top