Water Levels

Winemaking Talk - Winemaking Forum

Help Support Winemaking Talk - Winemaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dinich

Junior
Joined
Dec 24, 2009
Messages
12
Reaction score
0
Just bottled two kits: Green Apple reisling and White Zinfandel both of which turned out wonderful.

I made a mistake in my first kit, an Oregon Pinot gris, by adding too much water, I used a 7 1/2 gallon carboy and filled it all the way up (noob mistake)

Bought and used a 23 litre carboy this time, however when I finished I was filling it up to clean and it takes 6.75 gallons up to the neck.

When following directions it says to fill up with no head space, but it's also a 6 gallon recipe.

Will head space hurt me that much or should I add the extra water and risk diluting the wine?

Thanks for the help,

D
 
if its a six gallon recipe..get a truer six...6.75 is tooooo much
 
I don't worry too much about head space.....you're always better off keeping it tight to the neck but I'm often down to the shoulders and don't sweat it. The wine hasn't suffered that I've noticed.

I keep the airlock in so at the very least there's no new oxygen introduced.
 
Is it a smooth carboy are are there ridges on the sides cause the ones with ridges on the sides are italian carboys which are really 6.5 gallon carboys and each carboy will fluctuate a little giving you 6.75. A little headspace is ok though like Green Mountain states. Here is a picture of a Mexican carboy and IMo these are the only true 6 gallon carboys even though these also can fluctuate about 1/4 gallon. note the smooth sides. These are hard to get now as they went out of buisness.

2.jpg
 
I've got the ribbed one.
I marked off 6 gallons and will just use that

Thanks for the help, I'll keep my eyes open for one of the Mexican 6's

D
 

Latest posts

Back
Top