Is it worth it to make a second run wine?

Winemaking Talk - Winemaking Forum

Help Support Winemaking Talk - Winemaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AFW

Member
Joined
Jul 9, 2024
Messages
39
Reaction score
25
Location
Mason,OH
I have my Chambourcin Pomace vacuum bagged and frozen. Thinking about making a second run or using it in another kit wine. Searched for this topic and found several discussions not too favorable to second run mentioning the tasted flat or no body etc.

If this were you what would you do, make a second wine or use it in a kit or trash it?

This is my first time making wine from grapes so….
 
I made a kit on Chambourcin skins, frozen from my 2023 harvest. It was a Cab Sav kit. I think it turn out nice. Winemaker_81 is using Chambourcin and Chelois pomace with Pinot Noir juice buckets so he can give you a different perspective.,

My 2024 harvest was so huge that I didn’t bother with saving pomace.

Second runs, in my opinion are second rate. Use a kit or juice buckets to add to the pomace . Again, Winemaker_81 is your expert.
 
I won't say I'm an expert, but I've tried numerous variations so I do have a breadth of experience.

A typical second run wine is for every 2 gallons of wine from the first run, add: 1 gallon water, 2 lbs sugar, 1 tsp acid, 1/4 tsp tannin. The quality of the wine will vary directly to how much the first run was pressed. The harder it is pressed, the less "oomph" there is remaining in the pomace. The grapes have only so much to give, and if it all goes into the first run, there's nothing for the second run so a "meh" wine is produced.

My results by year:

2019 -- made standard second run wine from pomace of 15 total lugs Merlot, Zinfandel, and other Bordeaux grapes. I pressed the first run lightly and got a seriously good wine from the second run. I segregated the final pressings -- some was used for barrel topup, and the last carboy was bottled as-is. That wine was good for 4 years, which is about double that might be expected of a second run wine.

2020 -- Did the same with 16 lugs Bordeaux grapes, but pressed the first run harder. I have a basket press so pressing depth is by eye. This second run turned out ok, but was second rate. I used most of it for cooking.

2021 -- made only kits, so no second run wine.

2022 -- tried something different, adding the pomace from 8 lugs Grenache to a FWK Tavola Merlot kit. Did the same with 8 lugs Tempranillo. This came out rather good, the Grenache more so than the Tempranillo. The pomace had enough oomph that the Grenache/Merlot has a lot of Grenache flavor. The final result of this is that I'm unlikely to make a second run wine with water again.

2023 -- Added the pomace from 20 lugs CF, CS, and Merlot to a pair of 23 liter Sangiovese juice buckets. That ratio of pomace to juice was high -- it was hard to "punch down". We also pressed rather lightly and grossed just short of 24 gallons, which spent 12 months in barrel. The result was bottled last month and is stellar. Note that this wine is essentially half Sangiovese, half from the first run.

2024 -- Added pomace from 300 lbs each Chambourcin and Chelois (purchased from @VinesnBines) to a pair of 23 liter Pinot Noir juice buckets. We apparently pressed harder, and grossed 17 gallons (this is not a problem). This wine is totally green but the post-pressing tasting is positive, and is now in barrel until next fall.


So ... my advice is that if you pressed the pomace hard, don't expect much from a second run wine made with water. Adding it to a kit should produce positive results, although it will vary depending on how hard you pressed, and how much pomace you have with respect to the kit or juice bucket.
 
I don't have nearly that much experience, but let me chime in my 2 cents worth. It sorta depends on what you want to get out of it.

I made a second-run wine the first time I made wine from grapes. I recall someone here on WMT advising me something like "we've all been there and done that, but it isn't really worth it." To which I replied that *I* hadn't been there and done it, so I needed to do so. One of the important things to me was to get another round of practice in for making wine from grapes (as there really isn't much difference there between first-run and second-run wines). And it was essentially free.

I pressed the first-run wine very hard, leaving little goodness. The result was okay, but not exactly "wine." In our household, we referred to it as "a wine-like substance" or "sloppy seconds." It made a very easy-drinking quaff. Despite it being nominally a red wine, I served it chilled as a summer "porch pounder," and it filled the bill adequately.

So, I didn't regret making that wine, but I never did it again. If I still made kits, I would certainly add it to a kit. Adding to a bucket seems like a fine idea, too.
 
A typical second run wine is for every 2 gallons of wine from the first run, add: 1 gallon water, 2 lbs sugar, 1 tsp acid, 1/4 tsp tannin. The quality of the wine will vary directly to how much the first run was pressed. The harder it is pressed, the less "oomph" there is remaining in the pomace. The grapes have only so much to give, and if it all goes into the first run, there's nothing for the second run so a "meh" wine is produced.
We always made a "second wine" at home, many years ago and it was very decent wine. I believe part of the reason is that we did not press the first wine at all. We just let the free run out of the working barrels and moved that into finishing barrels. All of the grapes skins were still in the working barrel, to which water and sugar was added. The free run wine was marked "Per la famiglia" and was only for family, special occasions and good friends. The second wine was more an "everyday" wine for casual drinking and cooking.
 
We always made a "second wine" at home, many years ago and it was very decent wine. I believe part of the reason is that we did not press the first wine at all. We just let the free run out of the working barrels and moved that into finishing barrels. All of the grapes skins were still in the working barrel, to which water and sugar was added. The free run wine was marked "Per la famiglia" and was only for family, special occasions and good friends. The second wine was more an "everyday" wine for casual drinking and cooking.
One of my early mentors did something like this. He had food grade plastic barrels with spouts that he used as primaries. Post-fermentation he'd drain off the first run, then start the second without pressing. After that was done fermenting, he drain it. This typically provided him with two 60 US gallon barrels of first run and one barrel of second run.

Then he'd press the pomace, and divide that wine (which he called "squeezins") among the 3 barrels. His second run was about as good as most others' first runs.

Most of the guys I knew did things as I previously described.
 
Thinking about using half for a 3 gallon second run and using the other half to add to a juice bucket or kit. I had 100 pounds of Chambourcin grapes and was able to get the pomace into 3 vacuum sealed bags. It would be an experiment wine.

I’ll talk it over with my mentor.
 
I have my Chambourcin Pomace vacuum bagged and frozen. Thinking about making a second run or using it in another kit wine. Searched for this topic and found several discussions not too favorable to second run mentioning the tasted flat or no body etc.

If this were you what would you do, make a second wine or use it in a kit or trash it?

This is my first time making wine from grapes so….
Tried it once on the advice of some older-than-me-timers to try to make a rose'. Dumped it.
 
I think it very much depends on how well you have pressed the grapes. I have only made a very few batches of wine from fresh grapes and I can press only by hand as I do not have access to a press, and I have had no problems with a second run. But I would think that if your intended second run is a small batch - say 2 -3 gallons, and your first run was five or 6 gallons, then the "price" is small while the likelihood that you will get a delightful bonus is high. That said, I also make hard cheese and I have to say that I cannot typically make any ricotta from the leftover whey, because I have really extracted all the proteins and fats etc with the first run. So, by analogy, I do think it really depends on the "efficiency" of your wine making protocols.
 
Here is my second run for this year - 12 gallons of Cab. It is two Finer Wine Kits fermented with a sh*tload of pomace from 300 pounds of Petite Syrah.

I spent about $250 for the Finer Wine kits and I get around 60 more bottles of wine fermented on real skins. That’s a little over $4 per bottle for what I am expecting will be a really nice wine some day. IMHO, there is no substitute for real grape skins.

2ndrun.png
 
A typical second run wine is for every 2 gallons of wine from the first run, add: 1 gallon water, 2 lbs sugar, 1 tsp acid, 1/4 tsp tannin. The quality of the wine will vary directly to how much the first run was pressed. The harder it is pressed, the less "oomph" there is remaining in the pomace. The grapes have only so much to give, and if it all goes into the first run, there's nothing for the second run so a "meh" wine is produced.
Same here. Here's the formula I use:
For every gallon extracted from pressing:
1/2 gallon water
1 lb cane sugar
1 tsp yeast energizer
5g Tartaric acid
1/8 tsp of chestnut tannin
 
I’m curious, and interested, in how folks have arrived at their additions for making a second run wine.

I’ve made second run wines with unpressed pomace that turned out to be pretty good as well, not as good as the first run but not bad either. My process was to hit a particular SG and pH based on the pomace versus specific amounts of a recipe. My thinking is that there are changing variables in each different one that I do and so a specific recipe may not always work. I could over or undershoot where I should be without knowing a starting point.

That being said, you have to start somewhere~ do you begin with a base amount and then tweak further until you get to where you want?

My Italian family cooking experience is to taste and add without really measuring, or to use measurements like “just enough salt that your great grandmother would pinch out of that little white bowl with the gold rim”. My experience with winemaking has not been that, at least to this point, and I lovingly embrace both.

Again, not challenging anyone here just trying to learn the different ways people have achieved success.
 
I’m curious, and interested, in how folks have arrived at their additions for making a second run wine.
I followed CJJ Berry's recipe which fits with what others have mentioned. For example, if you made a two gallon batch, use the pomace for a one gallon second run batch, and treat it like any other wine. (Not adding yeast, of course.) My last 2nd run used the pomace from 3 1-gallon batches for a one gallon batch and I actually laughed when I tasted because it was unexpectedly good.
 

Latest posts

Back
Top