Quantcast

Double goat panel wine rack

Wine Making Talk

Help Support Wine Making Talk:

olusteebus

Senior Member
Joined
Mar 5, 2012
Messages
2,296
Reaction score
1,254
I said I would report back when I built a double goat panel wine rack.

I simply cut a 16 foot goat panel into 4 parts four by four each. In existing shelving, I placed two 1x4 2 foot long pieces and used wire clamps and secured two racks and then I did the same in front of that.

It ain't pretty but it works good for me. No one but I will see it.

In a 2 x 4x 4 space I can store 288 bottles.



I could not get a good photo but here is what I got.

wine rack.jpg
 

CGish

Eternal Tinkerer
Joined
Sep 4, 2015
Messages
128
Reaction score
76
Can you get a photo of how the wire clamps attach the panels to the wood?

Thank You,
Cody
 

olusteebus

Senior Member
Joined
Mar 5, 2012
Messages
2,296
Reaction score
1,254
I am using four of these plastic clips per side of each panel. I am not worried about strength so much as each panel is resting on the floor. If they were not, I would have to use something stronger.

When you cut a goat panel in four pieces, you will have two with not "rail" on one end of one of them and no rail on two ends. All cut ends were placed up and down. The pieces with the solid rail were used to mount with the plastic clips.

Hope this is not too confusing as I know I am not explaining it real clear. If you have any more questions feel free to ask.

20151123_124144.jpg
 

JimmyT

Member
Joined
Sep 20, 2014
Messages
365
Reaction score
103
Did you get the fence from tractor supply? If so, is it 4'x16' or 5'x16'?
 

olusteebus

Senior Member
Joined
Mar 5, 2012
Messages
2,296
Reaction score
1,254
It was 4x16. I got the clips from lowes. They are electrical wire clips you can get metal clips im sure.
 

JimmyT

Member
Joined
Sep 20, 2014
Messages
365
Reaction score
103
Ok thanks. I was planning out a few goat panel racks myself. The way I'm planning it I don't think I'll need any clips, I'll have all the openings available and it'll be more sturdy.
 

olusteebus

Senior Member
Joined
Mar 5, 2012
Messages
2,296
Reaction score
1,254
Ok thanks. I was planning out a few goat panel racks myself. The way I'm planning it I don't think I'll need any clips, I'll have all the openings available and it'll be more sturdy.
All my openings are available. I have room for 288 bottles. It gets its vertical support from the floor.
 

Latest posts

Top