Bentonite
sediment out.
Bentonite is unique in that it can be added to your wine either before or after fermentation. Most kit wines include Bentonite in the add pack, with instructions on how to mix it into the must before adding yeast. If you just dump the dry Bentonite into the must or wine, it will instantly turn into a clump of white mud and go straight to the bottom. It needs to be hydrated in a cup of hot water, and whipped into a slurry — preferably with a blender — and stirred into the must.
When added pre-fermentation, it first settles to the bottom of the grape must. But when the turbulence of fermentation begins, CO2 gas bubbles form in the must and grab onto the Bentonite. The bubble will lift the Bentonite up to the top of the fermenting must, attracting positively charged solids as it rises. The bubble will burst when it reaches the surface, and the Bentonite particle will fall to the bottom again, still gathering positively charged solids as it sinks. This up and down circulation of Bentonite during fermentation clears your wine as it ferments. The self stirring action of fermentation allows the Bentonite to collect the dead yeast and other particles as they are being produced, so that by the time you are ready to rack from the primary, the Bentonite will have gathered a nice sediment of unwanted solids and dead yeast on the bottom.
In addition, Bentonite helps keep wine stable during fermentation. When making kit wines, I have found that not adding the Bentonite on day one, as per instructions, sets the stage for an overly vigorous fermentation that tends to foam over and make a mess — even to the point of pushing the loose cover off the primary pail.
Bentonite can also be added post fermentation. It will still sink to the bottom, but will not rise again unless you stir it yourself. Therefore, if you add Bentonite after stabilizing, stir vigorously three times each day to degas your wine and the Bentonite will be more effective. Even so, for post fermentation, you might want to consider other effective fining agents.
Carbon (activated charcoal) (no charge): Carbon is not known as a clarifier so much as an effective remover of off-odors. Activated charcoal is used in household air filters, water filters and foot pads to absorb unwanted odors. The same principle applies to wine. Since carbon has no charge, it does not attract particles, but absorbs them. It can absorb the browning off-color and off-odors of oxidized wine. If overused, carbon can also strip wine of color, flavor and character, and will actually create an
WINE FAULT.................